Twin-Ram Auto-Tie Balers
JF66 Series
Medium-duty; smaller footprint
PR Series
Heavy-duty; bales stack 3-high × 2-wide, without turning * (Chambered)
All Include:
- replaceable wear liners and slatted floors
- adjustable, replaceable shear knives
- open-loop, thermostatically-controlled fluid cooling
- feed hopper atop top feed opening
- touch-screen interface for settings, help screens
- electric-eye auto-actuation
- floating clevis cylinder mount to protect seals
| Model | Bale Size | Cylinder(s) | Horse Power | Top Feed |
|---|---|---|---|---|
| JF66/2 | 30"H x 60"W 46"L | (2) 6" bailing + (2) 6" eject | 20 | 60"W x 40"L |
| PR-9 | 30"H x 44"W 46"L | 9" bailing + 8" eject | 60 | 44"W x 66"L |
| PR-9x | 30"H x 44"W 46"L | 9" bailing + 8" eject | 60 | 44"W x 72"L |
| PR-10 | 30"H x 44"W 46"L | 10" bailing + 8" eject | 60 | 44"W x 60"L |
| PR-10x | 30"H x 44"W 46"L | 10" bailing + 8" eject | 60 | 44"W x 72"L |
| PR-12 | 30"H x 60"W 46"L | 12" bailing + 8" eject | 60 | 60"W x 96"L |
full platen penetration (on PR series)
conveyors
conveyor control interface
custom feed hoppers
Additional horsepower
operator station placement
regenerative hydraulics
dual/redundant power units
bale separation door
pre-press
Miscellaneous Horizontal Baler Options
VOLTAGE OPTIONS. All through 10HP are tri-volt ready for; 208 240 or 480 Volt power. All above 10HP are wired only for 480 V. operation unless an upcharge is added as follows (per motor):
- Optional voltage upcharge per motor for 15HP (standard=480 V.)
- Optional voltage upcharge per motor for 20HP (standard=480 V.)
- Optional voltage upcharge per motor for 25HP (standard=480 V.)
- Optional voltage upcharge per motor for 30HP (standard=480 V.)
- Optional voltage upcharge per motor for 40HP (standard=480 V.)
- Optional voltage upcharge per motor for 50HP (standard=480 V.)
- Optional voltage upcharge per motor for 60HP (standard=480 V.)
- Optional voltage upcharge per motor for 75HP (standard=480 V.)
Oil-to-air cooling system thermostatically controlled recommended for
- up to 25 HP
- for 25 to 60 HP
- for over 60 HP
Upcharge from standard open-loop to closed-loop cooling system
Oil heater immersion type
- 1500 Watt (requires separate power)
- 3000 Watt (requires separate power)
Three-position retract limit (1/3 2/3 full)e
Single-head 10HP fluffer interfaced with baler controls swing-away manual door
Double-head (10HP x2) fluffer interfaced with baler controls swing-away manual door
Hydraulically powered swing-away doors hoods diverter plates
Liquid clutch (per head)
Fused disconnect options integral with power box (per motor):
- Fused disconnect on power box -- for 5 HP 3Ø
- Fused disconnect on power box -- for 10 HP 3Ø
- Fused disconnect on power box -- for 15 HP 3Ø
- Fused disconnect on power box -- for 20 HP 3Ø
- Fused disconnect on power box -- for 25 HP 3Ø
- Fused disconnect on power box -- for 30 HP 3Ø
- Fused disconnect on power box -- for 40 HP 3Ø
- Fused disconnect on power box -- for 50 HP 3Ø
- Fused disconnect on power box -- for 60 HP 3Ø
- Fused disconnect on power box -- for 75 HP 3Ø (**not available for 208 V.)
Extra emergency STOP button
Extra safety limit switch
