Horizontal Open-End Auto Tie Balers
| Baler Series | Cross Section | Bale Lengths | Cylinders | Horse Power | Top Feed |
|---|---|---|---|---|---|
| B | 30" x 30" | variable | 7" + | 25 + | 30" x 30" + |
| C | 30" x 42" | variable | 7" + | 25 + | 30" x 36" + |
| D | 42" x 30" | variable | 7" + | 25 + | 42" x 46" + |
| E | 42" x 42" | variable | 8" + | 25 + | 42" x 46" + |
| G | 60" x 30" | variable | 10" + | 50 + | 48" x 40" + |
Different bale size
Larger or multiple cylinders
Longer or shorter top feed opening
Custom feed hoppers
Additional horsepower
Dual/redundant power unit
Handing
Fluffers
Bio-degradable AW hydraulic fluid
Shear blades
Ripper teeth
Fluid heating or cooling
Extra wear liners
Regen' hydraulics
Lower or Upper eye systems
Elevation for underneath cleaning
Dumpers, tippers
Miscellaneous Horizontal Baler Options
VOLTAGE OPTIONS. All through 10HP are tri-volt ready for; 208 240 or 480 Volt power. All above 10HP are wired only for 480 V. operation unless an upcharge is added as follows (per motor):
- Optional voltage upcharge per motor for 15HP (standard=480 V.)
- Optional voltage upcharge per motor for 20HP (standard=480 V.)
- Optional voltage upcharge per motor for 25HP (standard=480 V.)
- Optional voltage upcharge per motor for 30HP (standard=480 V.)
- Optional voltage upcharge per motor for 40HP (standard=480 V.)
- Optional voltage upcharge per motor for 50HP (standard=480 V.)
- Optional voltage upcharge per motor for 60HP (standard=480 V.)
- Optional voltage upcharge per motor for 75HP (standard=480 V.)
Oil-to-air cooling system thermostatically controlled recommended for
- up to 25 HP
- for 25 to 60 HP
- for over 60 HP
Upcharge from standard open-loop to closed-loop cooling system
Oil heater immersion type
- 1500 Watt (requires separate power)
- 3000 Watt (requires separate power)
Three-position retract limit (1/3 2/3 full)e
Single-head 10HP fluffer interfaced with baler controls swing-away manual door
Double-head (10HP x2) fluffer interfaced with baler controls swing-away manual door
Hydraulically powered swing-away doors hoods diverter plates
Liquid clutch (per head)
Fused disconnect options integral with power box (per motor):
- Fused disconnect on power box -- for 5 HP 3Ø
- Fused disconnect on power box -- for 10 HP 3Ø
- Fused disconnect on power box -- for 15 HP 3Ø
- Fused disconnect on power box -- for 20 HP 3Ø
- Fused disconnect on power box -- for 25 HP 3Ø
- Fused disconnect on power box -- for 30 HP 3Ø
- Fused disconnect on power box -- for 40 HP 3Ø
- Fused disconnect on power box -- for 50 HP 3Ø
- Fused disconnect on power box -- for 60 HP 3Ø
- Fused disconnect on power box -- for 75 HP 3Ø (**not available for 208 V.)
Extra emergency STOP button
Extra safety limit switch
